How to make a cat from paper - a diagram and patterns. How to make a crawl cat with your own hands - overview of materials, step-by-step instructions for beginners, photo examples how to make a cat out of the simplest

Make your fluffy pets can be absolutely from different remedies, here are some options:

• cardboard and paper;
• napkins and fabric;
• plasticine;
• matches;
• balloons.

But this is not the entire list of materials for the creation of cats, the expanses of the Internet and books have even more secrets.

Crafts for beginners

Imagine a list of ideas of cattle crafts for your children with whom they will easily cope. Since creativity occupies a very important place in the development of children, these crafts are clearly suitable for them, they develop thinking and fantasy.

Cat from a CD

The first option for our fluffy friend is a portrait on a DVD. For its manufacture, prepare a disc, marker, glue and tape double-sided, corrugated and colored paper, scissors.

Instructions for the creation:

First, make a black circle of paper, its size will be a little more disk circle. It will replace the nose of the cat, get it in the center of the disk. Eyes and ears cut out of beautiful paper, shape and color will depend on you. You can come up with, and you can compare with a photo or picture.

We connect the disc with the eyes and ears, you can also make a tape or paper beautiful butterfly. Cat will be funny and solid.

Puff puff pastry

The cauldron will be able to please his presence on the wall of your home, it is a way to supplement the interior. The creative process can not not please the person, especially when the outcome of the work exceeds all expectations. You will need a stationery knife, cat shape pattern, foil, frame, beads and ribbons, acrylic paints and puff pastry (water, salt, flour).

Phased creation.

We take the finished pattern of the cat, you can draw it yourself, you can take ready-made from the Internet. The dough must be kneaded from salt, flour and water, in a 1: 1: 1 ratio. Water is added to the dough it is not too sticky. This consistency will make a mixture suitable for use and creating a work.

Rolling with a dough with a cake and apply a stencil, we cut the figure with a knife. In order for the dough does not adhere to the table or to the tissue, it is best to use foil as a litter.

To dry out the test composition, three to four hours, after that it becomes tough and the edges of the figure must be pulled out by sandpaper. A drawing of the desired cat is applied with a thin marker, and then using any paint to paint the craft. By painting, the mood will only rise, and the process will bring pleasure.

The background can be drawn on the cardboard and make it absolutely anyone. On top of the cards, cover the craft from the dough, and the frame is put on top of the entire picture.

Decorativeness can be added using beads or ribbons, tie bows and nodules. For a better effect, it is necessary to cover the work of varnish and dry.

Cat from felt

To craft from felt, it is necessary to prepare felt, glue, syntheps, pencil and paper, beads and threads, scissors. Using a template or your efforts, apply on the felt with paper, the outline of future work. The most convenient to use needles or pins, for connecting paper and fabric.

You need to make parts of the kitty separately, as well as the two sides: facial and rear. By contour, cut the part with a knife or scissors. The muzzle decorate the eyes-buttons, nose and mouth - multicolored threads.

Details we connect with each other, sew your tail, head and paws to your places. During the sewing, fill the details of the syntheps, giving volume and airiness. Seam apply needed, it will look beautiful. At your request, you can add decoration details: scarves, ribbons, bows, butterflies, ties.

Paper cat

Well, and how without paper art, excellent material for creating your four-legged friend. Find Application This miracle can be easily, such as a desktop or bedside table. For its manufacture, prepare cardboard (black, green), yellow paper, marker, glue and scissors.

And now directly the process of creating a cat. Take the cardboard of black and lay down in half, and on the fold line cut the knife. One of the parts again bend in half and cut the semicircle, we get a cat caller.

On the paws we make fingers with curls, bending them, on the basis of the stand from the cardboard, glue. Green cardboard will serve our basis with herbal coating. For tail Create an incision in the back of the cat's body.

Another cardboard part folds in half and will become the basis for the head. The edges are spinning and make cuts for ears on it, we connect the glue with the torso. Yellow paper is suitable for feline eyes, which depict the pupil marker. Draw a mustache and cut out, all the details glue to the cat's face. In the incision of the back insert the cardboard tail. Now your wonderful job can be placed on the closet, wall, table or bedside table.

We introduced you a list of ideas and materials to create all your favorite cats that will please our presence. The processes of creating such work are fairly lungs, and the resulting crafts become a wonderful work. They can be used for their decoration and for the gift present made by their own hands.

Such pretty kittens do quite easily. Watch in the photo, repeat every action and after 20 minutes you have a paper kitten on the shelf. And then two. The most difficult thing in the cradle is to figure out how to make ears. And even the preschooler will cope with the rest of the job.
So, proceed. Square sheet of paper form diagonally. Expand. Starting from the angle through which the fold passes, bend the two sides of the sheet to the middle.

Arch up in half, connecting opposite angles.

Side sides bend inside so that the bottom has direct corners.

Top down deploy the cradle.
The bottom corner, bend upside down strictly centered to the edge of the bent sheet.

The left lower part of the crafts be bend so that the fold is on the edge of the triangle - the pointer indicates the place.
You must have such a figure.

Reapely bent the curved part and do the same with the right side of the craft.

Expand. You have two lines - markup.

Turn the folded sheet to the other side.

Generate the bottom of the craft to the top so that the fold is passing through the intersection of the lines.

Expand the folded sheet as shown in the photo.

Bend to the middle of the upper side sides of the crafts for bends (see the pointer).
Like this.

Now you have to make the cat's head and ears. Two side corners of the upper triangle bend so that the vertical side lines come out, and the inside of the sheet (in the photo it is white) turned out to be closed.

There are "pockets" above. Open it and bend the sides as shown in the photo.

Lower it down. You got a "converter".

Right side of the crafts turn over to the left so that the resulting "converter" is inside.

Top right part of the workpiece fold in half.

Expand.
Managing the moving part of the workpiece to the right and fold in half the left part of the part.

Begone again.

Open the craft in the center.

Boot up two moving parts of the workpiece on the lines just made. Now the ears of the kitten have become visible (look at the pointer).

Now hold the right hand of the kitten with one hand so that it does not open, and pull the paper sheet with the other hand and expose it from the same side.

Bend the sequin sheet as it falls.
Do the same on the left.

Both lower sides, bend to the middle.

Fold the craft in half along so that the head of the kitten turned out to be top.

Make a cat tail. To do this, bent the right side of the crafts down, as shown in the photo.

Would you like to know how to make a paper cat? Just follow the step by step manual and everything will definitely work out. This handicap includes origami elements, but it is absolutely not complicated. I made a black cat on Halloween, this example and take the basis, but your cat can be absolutely different colors.

What will need materials?

• Black cardboard, preferably dense;
• Yellow colored eye paper;
• Scissors, adhesive pencil, black felt-tip pen, simple pencil.

Paper cat do it yourself step by step

Cut the black cardboard into two smooth parts. One half will be head, and the second torso.

First make a torso. Bend half cardboard in half. On one side, draw a semicircle.

Cut the semicircle at once on two parts of the folded cardboard. This is the part of the cat. He has a torso and 4 paws. Try not to make them too thin, that is, not to make a semicircle very large. I have a width of the paw - 3 cm, and the height of the body is 4.5 cm.

Make cuts on the top in the paper bend area. These are the places of fastening the body with head and tail. Also sew the bottom of the paws. But this step is designed not only for the completion of the cat from paper, or beauty. In the original, the cat is glued to green paper on these bends. It seems that the Kotofey is on the green lawn.

Now go to the creation of a black cat's head. To do this, take the second half of the cardboard and cut off the band on the narrow side, slightly less than 4 cm.

This strip will be a gorgeous tail. The ends of the strip need a little to zap. But afterwards, I still cut off one narrow tip, making it directly, since the tail was poorly held in the slot of the body. There is a suspicion that my cardboard is not solid enough. Perhaps you will succeed.

We continue with your head. The remaining cardboard, the one from which we cut off the strip on the tail, fold in half. Round the tips of the split part of the paper.

Open paper and make side cuts only on one part of it, to the collapse area.

Then return the paper in the folded position and turn out the protruding ears.

Cut out the yellow paper long narrow eyes and draw vertical pupils with felt-tip pen. Cut from black cardboard mustache - 6 strips, width, about 5 mm and a length - 9 cm. Also need a nose.

Cover the cat muzzle, round sharp corners. Stick your eyes, mustache, and on top of the nose.

Place the head in the slot on the back of the back, placing the rear half, and the tail. Kotofey Ready. You can glue it to green paper for stability or leave it. Now you know how to make a cat from paper on Halloween and not only. The cat is pretty rather big, of course, if you need smaller sizes, paper should be twice as smaller.

Black cat with a witch, how to do it look.

Dark Trinity together. Phased bats.

If we talk about materials for creating children's crafts, then paper, perhaps, ranks first. It is from it that we offer to make a red cat in our master class.

To create such a paper craft, we took:

• 2 square sheet of orange one-sided paper;
• plastic eyes;
• black marker;
• glue.

From the cooked two squares we will make our heads and torso of our cat. Let's start with the creation of his head. To do this, on the first square we perform diagonal bends.

Then we deploy it with a white face up, and the upper corner bend to the center. You should also get a bit of the bottom corner on the opposite direction.

Now the upper side of our workpiece bend down.

We start bending the corners. First down the left corner.

After that, bend the right corner.

Top corner slightly bend down.

All bends are lining. So looks like head blank with the front side.

We form a small spout on it, startping the protruding corner down.

Now we will deal with the creation of the body. For this, the second square is folded on the diagonal.

After that we spread it, and the sides bend to the midline.

The workpiece of the cat's body is folded in half.

Now we will create a tail. To do this, a narrow corner bend to the side.

After at this place we form a fold, flexing the corner to the side, it will be the tail of our cat.

DIY COTICS are not inferior in popularity to their live brethren. You can find almost anything in the form of a kitten or with its image: pillows, clothes, cups, toys, and so on. We bring to your attention a few master classes on the topic "How to make (origami from paper) Cat." For them, you can make your paper kitten yourself.

Required tools and materials

To make an origami-cat, you will need:

1. paper that can be bent (regular sheet landscape, colored paper, corrugated, special paper for origami and so on);
2. scissors (need to give a square square);
3. markers, paints, pencils or handles (needed to draw a fruit);
4. any decor: beads, beads, ribbons and bows, sequins and so on.

How to make paper cats?

The instruction is quite simple, and the order of work depends on how you make a cat. This can be done in two options:

1. The cauldron is made of two sheets of paper: from one there is a muzzle, from another - caller.
2. The cauldron is made of one sheet of paper.

Make the face of the cat (first option)

Master class "How to make a cat out of paper": Make the muzzle in the first way:

1. Put in front of you square sheet of paper (illustration 1).
2. Fold together the right upper and left bottom corner. The result is a triangle (illustration 2).
3. Generate the left corner of the triangle down in such a way that its tip is on the same level, but not in contact with it (as in the illustration 3).
4. Bend the right corner in the same way as the left (illustration 4).
5. Little inside the middle corner up as on the illustration 5.
6. Turn the figure.
7. Draw eyes, spout, mouth and mustache (illustration 6). You can draw another brow.

Fork cat ready!

The second way to make a muzzle

Master class, how to make a cat made of paper (photo-instruction on the manufacture of muzzle):

1. We put a square sheet of paper in front of you.
2. We fold it in half to get a triangle (Illustration 1).
3. Deploy a piece of leaf. The fold line should be in front of you horizontally.
4. Top corner bend to the middle of the sheet (illustration 2).
5. We fold the sheet again in half, as in the illustration 3.
6. Conditionally divided the resulting figure as in the illustration 4.
7. Fold the left and right corners to the center along the lines from the sixth point (illustration 5).
8. Bend up the left and right side, as on the illustration 6. That is, the fold line must be not direct, but at an angle and be in the center of length.
9. You got ears.
10. Check the top corner of the shape down, as in illustration 7.
11. Turn the figure to the back side.
12. Bend a little bit of the bottom angle (illustration 8).
13. Generate down the tip of the angle from the previous item, as in the illustration 9.
14. Draw eyes, mustache, spout and mouth. Or glue them out of paper.

Mordotka is ready!

Catual body

Master class, how to make a cat from paper (instruction for creating a torso):

1. We take a square sheet of paper and put it in half to get a triangle (illustration 1).
2. Expand the paper sheet.
3. Fold the right and left side to the fold line, as on the illustration 2.
4. Fold the resulting figure vertically in half (3).
5. Put the resulting figure horizontally in front of yourself.
6. Generate the sharp angle down, as in the illustration 4.
7. Wrap a corner again (illustration 5).
8. Open angle (illustration 6).
9. Adhere to your left hand the bulk part of the figure, and rightly straighten the angle.
10. Fold the straightened angle at an extreme fold line, as in illustration 7.
11. Call the angle up in such a way as on the illustration 8. You have got a kitty tail.
12. Roll the tail in half vertical (illustration 9). To do this, turn the left side to the right.

The body for the cat is ready!

Now connect the body and muzzle. If you use the muzzle from the first option, then it must be glued, and if from the second, then just put it on the calf.

Whole cat from one sheet of paper

Master class, how to make the origami from paper cat:

1. Take a rectangular sheet of paper with the aspect ratio of 1 to 3 and put it horizontally.
2. Fold in half (illustration 1).
3. Reduce each of the sides, bent them also in half, as in the illustration 2.
4. Expand the latest folds and turn the sheet upside down.
5. Wrap the left bottom corner up (3). You got the similarity of the pointer.
6. Wrap back the angle of the pointer (3).
7. Come on all bends.
8. Open the paper sheet fully.
9. Fold a sheet of paper in such a way as indicated on the illustration 4.
10. The left and right vertex is the ears of the future cat (illustration 5).
11. Now do everything as on the illustration 6. On it, the green triangle is used to designate the lines by which you need to make chin.
12. Squeeze the bottom of the chin. Fold the top, as shown in the illustration 7. If you do everything right, then at this stage you have already formed a fruit and a little ears.
13. Bend in half the remaining piece of the sheet (illustration 8). As a result, you will have a tail.
14. On both sides of the previous fold, there are two more diagonal. Fold paper in such a way as on the illustration 9 . You will get your paws.
15. Raise the body perpendicular to the tail.
16. Bend the sides of the tail in this way as on the illustration 10.
17. Tighten your tail with a pencil or scissors (only neat).