Sockets from paper "Snowflakes". How to make a flower socket made of paper outlet of paper of different sizes

Sheets of color office paper A4 format glue with adhesive pencil two. For rosettes with a diameter of 10 cm (small snowflakes), sheets must be glued along the long side. For a larger diameter sockets.
Paper cut on a strip of about 5 cm wide for small snowflakes. And on the strip 7 cm for large. Do not forget that for outlets of different diameter, the strip must be of different lengths.
Put the strip on the rug for cutting with a centimeter markup and sell folds of folds through each centimeter. The best tool for this operation is a ballpoint pen without ink.

Tip: You can buy folds before paper is cut into stripes.

Fold the harmonica stripes on the outlined folds.

Then cut the patterns inside the harmonica. Also small, four to five folds, portions.

Spread the harmonica to the ring with adhesive pencil.

Collect the resulting ring in the outlet. In the middle of a little hot glue drip. Hold the socket while the glue does not freeze. You can use quick-drying contact glue. But then the spout should be fixed for the drying of the glue. For example, to press some object (however, hot glue is more convenient).

For large snowflakes, the diameter of the head is 5 cm, for small 4 cm. Cut out from dense white paper. I use watercolor with the embossed "shell". Hairstyle Make a colored paper mug.

Face draw a silver gel handle with glitter. Eye to make a pencil on the stencil "circle", and then circle the handle. Decorate the same handle hair.

Large snowflakes need an extra layer between the outlet and head. Circle paper with a diameter of 9 cm fold radially and cut out a simple snowflake.

Or use an openwork confectionery napkin as the middle layer.

Glue all layers. Ready snowflakes decorate with glitter. Lubricate the plow glue the place you want to decorate, and sprinkle with sparkles.
Behind glue a circle of color "Silver".

All snowflakes differ from each other. Therefore, it seems to me that this is a good option for joint creativity. Each will make their snowflake, and then you can collect a large garland or mobile.

These are small snowflakes. 10 cm diameter.

Photographing the mobile is very difficult. Everyone flies :) Yes, even dark in the kitchen. In kind, it looks much better.

Snowflakes sockets made of paper. Of these, you can make a mobile, garland. Or use as a single decoration.

Tip: You can buy folds before paper is cut into stripes.

Fold the harmonica stripes on the outlined folds.

Then cut the patterns inside the harmonica. Also small, four to five folds, portions.

Spread the harmonica to the ring with adhesive pencil.

For large snowflakes, the diameter of the head is 5 cm, for small 4 cm. Cut out from dense white paper. I use watercolor with the embossed "shell". Hairstyle Make a colored paper mug.

Face draw a silver gel handle with glitter. Eye to make a pencil on the stencil "circle", and then circle the handle. Decorate the same handle hair.

Large snowflakes need an extra layer between the outlet and head. Circle paper with a diameter of 9 cm fold radially and cut out a simple snowflake.

Or use an openwork confectionery napkin as the middle layer.

Glue all layers. Ready snowflakes decorate with glitter. Lubricate the plow glue the place you want to decorate, and sprinkle with sparkles.
Behind glue a circle of color "Silver".

All snowflakes differ from each other. Therefore, it seems to me that this is a good option for joint creativity. Each will make their snowflake, and then you can collect a large garland or mobile.

These are small snowflakes. 10 cm diameter.

Photographing the mobile is very difficult. Everyone flies :) Yes, even dark in the kitchen. In kind, it looks much better.

A source

Round socket Made from folded harmonic paper. It can be an abstract composition element or depict flower. I have about 20 minutes to go on one outlet, although I do not use any special tools.

Step 1. You need to cut off the paper strip. I took for example a striq with a length of 28cm and 2,5 cm wide.

Options: You can take paper with a pattern (not dense, to be easily bent), one of the edges can be trimmed with curly scissors or a hole punch.

Step 2. Fold the harmonic strip.

Options: With a big bing board, it is much easier, but you can also take grace with your hands. So that they were even, you can first apply marking. But it will take time, and for flowers, it seems to me that small errors are allowed.

Step 3. Apply glue (reliable enough) on the extreme side of the fold ...

Step 4. ... and glue the harmonic in the ring.

Step 5. While the socket glues, cut the circle. I have it 1.5 cm in diameter.

Options: You can take a contrasting paper for the sink of the socket. It can be more than the size, and another form.

Step 6. The most responsible moment! On the circle to pre-apply glue (also reliable). The harmonica gently decompose on a flat surface and holding it, stick a circle to the middle. Firmly press and hold.

Step 8. Printed a rosette to the base. In order not to keep, you can press with something with something (but not very hard!).

Socket-flower is ready!

Here are some ideas, how can I use sockets and rosettes:

In the sockets are the design of the album page.

An interesting decoration for the new year! All snowflakes differ from each other. Therefore, it seems to me that this is a good option for joint creativity. Each will make their snowflake, and then you can collect a large garland or mobile.

Paper cut on a strip of about 5 cm wide for small snowflakes. And on the strip 7 cm for large. Do not forget that for outlets of different diameter, the strip must be of different lengths.

Put the strip on the rug for cutting with a centimeter markup and sell folds of folds through each centimeter. The best tool for this operation is a ballpoint pen without ink.

Tip: You can buy folds before paper is cut into stripes.

Fold the harmonica stripes on the outlined folds.

Then cut the patterns inside the harmonica. Also small, four to five folds, portions.

Spread the harmonica to the ring with adhesive pencil.

For large snowflakes, the diameter of the head is 5 cm, for small 4 cm. Cut out from dense white paper. I use watercolor with the embossed "shell". Hairstyle Make a colored paper mug.

Face draw a silver gel handle with glitter. Eye to make a pencil on the stencil "circle", and then circle the handle. Decorate the same handle hair.

Large snowflakes need an extra layer between the outlet and head. Circle paper with a diameter of 9 cm fold radially and cut out a simple snowflake.

Or use an openwork confectionery napkin as the middle layer.

Glue all layers. Ready snowflakes decorate with glitter. Lubricate the plow glue the place you want to decorate, and sprinkle with sparkles.
Behind glue a circle of color "Silver".

These are small snowflakes. 10 cm diameter.

Photographing the mobile is very difficult. Everyone flies :) Yes, even dark in the kitchen. In kind, it looks much better.

Round socket Made from folded harmonic paper. It can be an abstract composition element or depict flower. I have about 20 minutes to go on one outlet, although I do not use any special tools.

Step 1. You need to cut off the paper strip. I took for example a striq with a length of 28cm and 2,5 cm wide.

Options: You can take paper with a pattern (not dense, to be easily bent), one of the edges can be trimmed with curly scissors or a hole punch.

Step 2. Fold the harmonic strip.

Step 3. Apply glue (reliable enough) on the extreme side of the fold ...

Step 4. ... and glue the harmonic in the ring.

Step 5. While the socket glues, cut the circle. I have it 1.5 cm in diameter.

Options: You can take a contrasting paper for the sink of the socket. It can be more than the size, and another form.

Step 8. Printed a rosette to the base. In order not to keep, you can pick up something with something (but not very hard! 🙂).

Socket-flower is ready!

Here are some ideas, how can I use sockets and rosettes: