Openwork crochet beret for girls. Easy crochet berets

A child's beret knitted by mother's hands is the most best decoration for the little fashionista. Such a headdress not only looks beautiful, but also performs an extremely important function - it protects the head from overheating and sunstroke. In this article we will tell you how to crochet a beret for a girl with your own hands with diagrams and descriptions. The master classes presented below will be divided by age, but this does not mean that this product will not be suitable for your child, you will just need to recalculate the size and amount of material.

Openwork for baby

In this master class we want to tell you how to knit an openwork beret for a little beauty. The lesson is simple, suitable for beginners in needlework.

The size here is designed for a 2 year old child, if you want to make it for an older child, use more loops.

You will need:

Cotton threads with a density of 200 g/50 m;
Hook No. 2;
Hook No. 2.5.

First, we put 90 loops on the hook (if you are making it for a child over two years old, you will need more loops, but their number should be a multiple of six).

Using the fan pattern, we knit 5 tbsp. s/n., rapport is equal to six loops. We knit a circle of the required diameter, in this case we will need repeat pattern three times. Next, we make decreases according to the scheme:

Using a needle and a thread threaded through it, we go through the loops of the outermost row and tighten the crown. Our beret is ready.

Another variant

Now we will tell you how to knit an equally cute beret that is suitable for the summer, like the previous one, but with a different pattern.

First, we’ll tell you how to correctly calculate the size of your future headdress. The most important thing is to take the measurements correctly: the measuring tape should be drawn 2 centimeters above the eyebrow line, behind the ear, in a circle through the most protruding area of the back of the head.

When you measure the head volume, you need to divide it by 2. For example, if you are knitting a beret for a 3-year-old child whose head circumference is 51, your formula will look like this: 50/2 = 25.5. Or use this table (the numbers are approximate, you need to proceed from the size of a particular person).

To work you will need:

Thin acrylic yarn(50 grams);
Hook.

Carefully inspect the pattern, check whether the yarn you have chosen is suitable in thickness.

Cast on 4 chain stitches and close them in a circle.

Now we knit as indicated in the pattern, you should get it as in the photo.

Tie the circle with three rows of double crochets. The diameter of the resulting circle should be 24 centimeters.

Now gradually increase the number of columns, to do this, link every second column with the previous one, do this with a double crochet. Thus, the volume will decrease gradually.

Now we knit the mesh. To do this, cast on a double crochet and chain stitch and connect it with a double crochet and chain stitch from the previous row. Knit five rows like this (if necessary, from 4 to 7 rows).

Below is a mesh knitting pattern:

The beret is ready, you can decorate it with flowers, beads, and embroidery.

Mischievous "Sailor"

Sometimes you want to do something unusual for your daughter, all these ruffles, flowers and butterflies are already boring, in this case such a playful “Sailor” beret would be an excellent choice.

This particular instruction and description is designed for a 4-year-old girl, but it can be made smaller or larger.

You will need:

Cotton beach 400 m/100 g (50 g white, the rest is blue and red);
Hook No. 2.

Work process. Cast on 6 chain stitches with white thread and close them in a circle. Next, we knit according to pattern 1 until your circle becomes 30 centimeters in diameter.

Then we knit a single crochet with blue threads, making decreases (5 loops, 7 loops, 10 loops) in a circle to the required head circumference. Next, we knit with a blue thread of 1.5-2 cm in a single crochet and without decreases.

Tie the edges of the beret in one row with a single crochet. The diameter of the beret is approximately 31-32 centimeters. Now knit a lifebuoy using white and red yarn according to pattern 2. Sew it to the beret, you can also decorate the beret with a blue pompom, this will make it even more interesting.

The result is a very unusual and cute headdress that your child will definitely like. Here are some others interesting options berets in this style:

Video on the topic of the article

These, of course, are all the options for berets for girls that can be crocheted, don’t be afraid to experiment, stores sell very beautiful hats, but none can compare with those made by mother’s caring hands, this one is more pleasant to wear, and it can be made taking into account individual characteristics and wishes of your child. Perhaps watching the video materials with which we conclude our article will help you get inspired.

Classic style. We recommend combining a blue beret made of any wool or felt with a raincoat middle length And high boots or loafers. The raincoat should be a classic beige color. Also good with classic beret A long coat made of wool or cashmere is combined.
Casual style is well complemented by a large, voluminous beret. Pair it with a leather jacket, denim trousers, sweater or leggings. Plus large boots or boots with a thick platform.
Retro style is unthinkable without a beret - a pill. Combine this beret with a new look dress, or a flared knee-length skirt. Ballet flats, low-heeled ankle boots or pumps will go well with this look.

How knitted berets match your face type

If you have a round face, designers advise moving your headdress to the back of your head and leaving your curls loose, thus framing your face and making it visually more elongated. Unless, of course, you are happy with your rounded face shape.

For those who have an angular or square face, stylists recommend wearing the beret shifted to the side. It is better to partially hide the bangs or pin them with bobby pins.

The beret suits almost any face type, the main thing is to find your shape.

Crocheted berets for women, models from our website

As we wrote above, berets are very different. And needlewomen create knitted berets in any style..

Knitted beret for women in the style of Irish lace, master class!

Hello, dear women! Ah, summer, summer……….. it’s time to show off your work on your body! New job mine is a summer beret in style Irish lace. Idea by Zoya Leporskaya from Fashion Magazine No. 541. Author of the work: Nadezhda Lavrova.

Knitted a beret for women from leftover yarn. Flowers, leaves and a rim are made of half-wool, the mesh is knitted from thin cotton threads. Hook, 1mm, 2mm and 1.75mm. The headband (elastic band) is knitted with concave and convex stitches with 1 crochet. The last row is made with a smaller crochet hook up to the volume (56 cm) of the head.

The beret pattern for women has 2 circles: outer and inner. The diameter of the outer circle (bottom) is as you wish (standard 28-30 cm), and calculate the inner one using the formula: head circumference minus 2 cm for a tight fit, divided by 3.14. If you have a standard head circumference size of 56 cm, in this case (56 cm - 2 = 54 cm): 3.14 = 16-18 cm. You can increase or decrease your size according to your wishes. I tried to show the whole process in photographs. The elements are easy to knit, I have attached a diagram. I wish you all successful work, health and patience.

Tie the elements of a beret for women: flowers and leaves according to patterns 1 and 1a:

Arrange the finished elements on the pattern, creating a composition. Secure them with pins wrong side up.

Fill the empty spaces with an irregular mesh ( or in ).

Once the pieces are assembled, remove the pins and detach the fabric from the pattern. Along the edge of the side, tie a headband - an elastic band made of convex/concave double crochets.

Summer knitted beret for women

Summer beret for women “African flower”. Made from white mercerized cotton and orange cotton yarn. Size 54-55 cm. Hook No. 2. It took about 80 g. The work uses a pattern of a 6-corner motif “African flower” - 7 motifs connected to each other during the knitting process. No description. I offer it for viewing. Work by Anna Chernova.

Beret for women “Cosmeya”, made using the “freeform” technique from several types of yarn, classic and fancy. The headband of the beret for women is knitted in a circle, i.e. the beret is without a seam, it can be put on by turning it on either side, as desired. The exquisite combination of cool lilac, pink and gray shades is very impressive. Freeform motifs are connected or stitched together. The work used generally accepted patterns - caterpillar cord, T. Vashina's ties, “popcorn”, postal column, crab step, Tunisian knitting and other technical techniques. Work by Svetlana Shevchenko

Hello, dear friends. Contacted another set of berets for women + openwork scarf. I am sharing with you a description of the beret and a pattern of the scarf. The brooch was also made by me. Work by Elvira Vyazalova.

Crochet beret for women description

Viscose yarn from Magic, hook number 3. On OG 56.

Cast on a chain of 6 chains. p., close it in a ring. Knit 15 tbsp into the center of the ring. s/n. Next, knit a circle with a diameter of 25 cm, evenly adding 15 sts in each row. s/n. After this, knit 4 rows without increments. Next, knit 3 rows of st. b/n, decreasing every 5th loop. Then knit 6-7 rows of elastic in relief and stitches.

Beret for women “Crane”, made using the freeform technique from several types of yarn, classic and fancy. The bottom and brim of the beret are knitted from various volumetric motifs and homogeneous sections of fabric (Tunisian knitting, single crochet, etc.), the rim of the beret is made of convex and concave columns, and there are decorative lush columns along the edge. Work by Svetlana Shevchenko.

Turquoise hat is crocheted using the “broomstick” method from 100% wool Bianca Lana Lux 100g/240m color No. 866 - turquoise. Artwork by Nina Kolotilo.

The lining is knitted from the same wool with double crochets. The elastic is cast on with 104 loops using an elastic cast-on with a 2.25 clover crochet hook, the height of the elastic is 5cm. Then 2 stitches are knitted from each loop. + 2p. added during the process. It turned out to be 210 loops. The broomstick was knitted on a plastic ruler 3cm wide.

Crochet beret for women using the broomstick technique:

Beret for women “Blue Sea”, crocheted

Hello, my name is Olga. This is my first time submitting my work to the competition. I am 25 years old, raising a son. I love crocheting and crocheting hats. I called this work “Blue Sea” because the colors are so bright and saturated.

Knitting a hat for women is very easy.
I knitted with BABY threads from VITA (composition: 100% acrylic, 400 m/100 g), one skein of blue and blue.
Hook No. 2.5. Almost the entire skein of blue was not used for the entire beret, but only half a skein of blue. The alternation of stripes is as follows: a row of blue and 2 rows of blue, etc.

Description of work: I make 3 air loops and close them in a circle, then I tie 12 dc into the ring (3 vp rise)
Row 2: 24 dc.
3rd row: we make an increase to each column in relief, thus:

I knitted for size 51 cm. Thus, I knitted the bottom according to the pattern up to a diameter of 25.5 cm. Then I knitted 3 rows without increases.

Then there are decreases in loops: in the same way as additions. We decrease until the beret measures 28 cm when folded in half. Then we knit a sc for 5 cm.

Note: when knitting begins, RLS, the size of the hat decreases; out of 28 cm, I got 25. I did the binding in a crawfish step. I also knitted a flower brooch. It is attached to the back with a pin and can be removed if necessary.

Description of the flower: cast on 3 vp, connect into a ring: then 15 sc into the ring. 3 sc per petal. The petal is knitted like this: 5 chain stitches, then in the next loop 2 stitches with 5 crochets, in the next loop 5 chain stitches, a connecting stitch. And then follow the same principle for the remaining petals.

Also, in the back of the ring where the bottom began, I tied 2 flowers on a chain made of VP. It’s knitted like this: cast on a chain of VP 12 cm, 3 VP instep and connect it into a ring to the last loop of the chain, and knit the petals in the same way as for a brooch, only 3 VP instep and down, and the petals in double crochets.

Good afternoon My name is Guzel Fattakhova, I have been crocheting for myself and to order for a little over 2 years. Once I already sent my work - a sexy tunic with a spider web. This time I decided to show my summer openwork berets for women. I knitted many of them from the head, so there are no patterns for them. There is a diagram for only one (attached).

A beret for women, tied with lush columns - Irina's work.

ALIZE maxi threads (25% wool, 75% acrylic) - 100g/100m, 1.5 balls were used, hook number 2.

1st row - in a ring (2 times around the finger) 12 lush stitches, you can dial 3 chain stitches for lifting, but it’s better to just pull out a long loop.
2nd row - 24 lush columns (the columns will look like a tick).
3rd row - in the tick of the previous row there are two lush stitches (you will also get a tick), and in the space between the ticks, a double crochet behind the back wall. In general, the row looks like this: tick (2 lush stitches in the middle of the previous one, 1 treble stitch behind the back wall, 2 lush stitches).
4th row - tick, on the previous treble treble, tie 2 treble treble behind the back wall - this forms a beret wedge. tick...
5th row - tick, on the previous two treble s/n we knit 3 treble s/n (to get straighter wedges, we make additions on the last treble s/n, i.e. knit all subsequent rows on the last treble s/n / n of the previous row - two. To make it in a spiral, we make an increase at the beginning of the wedge (check mark, on the st. s / n of the previous row there are two st. s / n).

We make increases to the desired diameter, knit a row without increases - you can do more if desired, and then we start making decreases - there are two wedge decreases in a row at once, so that it is even (but you can do one at a time - at the beginning or at the end).
The number of wedges can be chosen arbitrarily - 6,8,9,12. But the more wedges, the rounder it takes.

When the diameter of the circle reaches 24 cm, finish the increases and, having knitted 2 cm straight, begin the decreases, distributing them evenly along the same lines where the decreases were made. When the diameter of the inner circle is 18 cm, knit another 2 cm straight. Next, proceed to decorating the beret with an applied applique. To do this, knit motifs of large flowers according to patterns 79a, 79c, 79d, 79e, then flowers and motifs of medium size according to patterns 796, 79e, 79g, 79i, as well as small flowers and leaves according to patterns 79z, 79k.

Create a composition by placing larger motifs along the side and the area of the straight knit, and smaller ones along the wide part of the bottom and in the spaces between large motifs. Sew the motifs to the canvas with wool thread. The next step is to knit the inside of the beret with cotton thread. Carry out the work in the same way, but knit the bottom to a circle diameter of about 22 cm, then straight to a height of 3 cm. Then begin the decreases, distributing them evenly along the same lines where you made the decreases. When the diameter of the inner circle is 18 cm, finish the work. Place the cotton piece inside the wool piece and make a sc stitch, connecting two layers of beret with cotton yarn, then the 2nd row of sc with wool thread to the circumference of the loops of the previous row.

The beret is crocheted using the Irish lace technique. An excellent hat for the summer: bright, playful and elegant.
For knitting women's beret crochet you will need: CoCo yarn (100% cotton, 240 m/50 g) - leftover yellow, blue, dark blue, purple, turquoise, red, green, melange and black colors, hook No. 2.

How to knit a beret for women

Attention! Before starting work, make a hat pattern in life size the size you need.

Knit flowers from multi-colored yarn according to pattern 1, from green yarn knit leaves according to pattern 2. Knit 1 poppy flower according to pattern 3. Lay out all the elements of the composition on the beret pattern, secure with needles. Fill the empty spaces between the elements with an irregular mesh of melange thread.
Then tie the band of the beret with turquoise thread in single stitches in a circle, evenly decreasing the loops until the required size (head circumference) is reached.

Knitted beret for women from a Japanese magazine

A very delicate and feminine beret is knitted from hexagonal and pentagonal motifs.

You will need: 100% mercerized cotton yarn; hook No. 2.5.

Below is a diagram of the implementation of motifs and options for their connection.

Dimensions of hexagonal motif A: 6 x 7 cm; pentagonal motif B: 5.6 x 5.3 cm.

For knitting you will need: 80 g wool yarn and hook No. 2 - 2.25 mm.

It is necessary to knit 25 hexagonal and 6 pentagonal blanks. It is necessary to knit the parts into one fabric while completing the last row. When all the motifs are connected together, you need to tie them around the edge, as indicated in the diagram, securing the st s/n and st. b/n in arches from v.p. Next we knit seven rows of st. b/n.

In the last row we perform a picot in every 4th loop.

Hexagonal motif

First r. In an amigurumi ring of 6 loops we knit arches from 2 vp, securing them with two sts. s/n with a common top and base.
Second r. In each top of two st. s/n we knit (1 tbsp. b/n + 5 ch. + 1 tbsp. b/n), in arches from 2 v.p. knit 2 tbsp. b/n.
Third r. In arches of 5 vp. knit (4 tbsp. s/n + 2 vp + 4 tbsp. s/n). Finish ss.
Fourth r. In Art. knit s/n *3 tbsp. b/n, then 5 vp. above the arch of 2 vp, 3 tbsp. b/n, ch 3, skip 2 loops, *. Continue from *.

The beginning of knitting is the top of the beret. We knit in accordance with the pattern until the diameter of the circle is 24 cm, increases are made due to the rows from st. s/n, namely due to those Art. s/n, which are knitted between st. s/n and “lush” column. Next, knit 2 cm without increasing, then begin to decrease the loops until the diameter of the beret reaches 18 cm. When making decreases, alternately knit a “lush” stitch in each loop and through the loop of the previous row, knit a st in between them. s/n. After this, knit 2 cm straight for the band.
Tie the beret next to the st. b/n and next to the “crawfish step”.

Crochet beret for women, video tutorials

An openwork beret for women can be crocheted not only according to the pattern, but also according to the video tutorial.

Summer beret for women, crocheted

For knitting you will need: Pelican yarn (100% cotton; 330m/50g), hook number 4 and 4.5. The beret is knitted from the bottom up, from the band.

The video should load here, please wait or refresh the page.

Openwork honeycomb beret for women, crocheted

Let's knit another summer openwork cotton beret. Anyone can do it, even a novice needlewoman! Knits quickly and easily!
The size of the beret is 56-58 cm. Made from Pekhorka Pearl thread (425m/100g; composition: 50% cotton, 50% viscose). Hook No. 2.

The video should load here, please wait or refresh the page.

With your own hands you can create an original autumn or winter option crochet beret for women. The diagrams and descriptions that come with each accessory model will help with this. In addition, you will need suitable yarn and a hook.

Preparing for knitting and choosing yarn

Before you start knitting a beret, you should decide on the model of the future product. For a warm headdress, wool yarn is well suited, as it retains heat for a long time. For lighter models, acrylic or cotton thread would be the best option.

It is worth choosing a pattern for the future product based on your crocheting skills. For beginners, it is better to avoid additional decoration of the beret, as this can significantly complicate the work.

To decide on the initial quantity air loops, you need to use a centimeter to measure the diameter of the head. The standard size is 54-57 cm.

Classic autumn beret

Will be a great addition to any look. It can be combined with a scarf made in the same color scheme or with gloves. To create it you will need:

300 g of yarn (50% wool and 50% acrylic);
hook number 3.

Now you can get to work.

Study the knitting pattern in detail so as not to get confused in the future.
Knit a chain of 6 chain stitches and close it into a ring.
Knit 6 single crochets into a ring. Continuing knitting in a spiral, add 6 stitches in each circular row.
Having knitted 21 circular rows, knit 6 rows, alternating 1 row without increases and 1 row with increases.
Then knit 8 rows straight, decreasing 12 stitches in each circular row until the beret fits snugly on your head.
Knit 13 rows of single crochet stitches straight.
For the lapel, the section is knitted straight, fold it along the floor and turn it over front side. Along the last row of the beret, crochet a chain of chain stitches through the fabric, connecting the lapel to the beret.
As a decoration, you can sew a pompom made from the same threads to the beret.

From thick yarn

This type of yarn looks good voluminous berets. With their help you can create a feminine and romantic image. Knitting from thick yarn is no different from regular yarn. But it is worth considering the size of the hook. It should be twice larger size threads To create a beret you will need:

thick yarn 120-140 g;
hook of the appropriate size.

Now the stages of work themselves.

Winter beret

Such a headdress will not only warm you up in winter frosts, but will also benefit any stylish look. You can make it yourself from warm wool yarn. For this you will need:

suitable wool yarn;
hook.

When everything is prepared, you can start working.

More details on how to tie correctly winter beret You can see it in the next video.

With visor

The beret can be not only flat, but also with a visor. Its creation is practically no different from classic version. Even a beginner can handle it after studying it in detail. detailed master video master class.

How to crochet a beret?

With the arrival of autumn, we all remember the need to wear warm and comfortable hats, and with the arrival of spring we want bright and beautiful new things. One of these hats is the beret. You can wear it at any age. I suggest you crochet a cute one lilac beret for your daughter, granddaughter or sister. The description and diagrams were prepared by Maria Nikitina.

For the beret you will need a size 3 hook, a skein of Alize Cotton Gold yarn (shade 616), and some light pink yarn for finishing.

Dial a chain of 3 VPs.
1st row: in the 3rd loop from the hook, knit 8 sc.
2nd row: 2 PP, knit 2 sc from each even column of the first row and 1 from the odd one. There will be 12 loops in total.
3rd row: 2 PP, then knit a row according to pattern 1.

Using the same pattern, you need to knit all rows up to the 10th.

Knit rows from 10 to 17 according to pattern 2.

Number of loops
3rd r. – 26 p.
4th r. – 36 p.
5th r. – 54 p.
6th r. – 72 p.
7th r. – 90 p.
8th r. – 108 p.
9th r. – 126 p.
10th r. – 135 p.
11th r. – 153 p.
12th r. – 171 p.
13th – 17 r. – 225 p.

In rows 18 to 31, work sc.
On rows 18 to 21, shorten every fifth stitch.
18th r. – 180 p.
19th r. – 144 p.
20th r. – 116 p.
21st r. – 93 p.
22nd r. – 75 p.
23rd – 30th r. – 75 p.

For the 31st row, knit 75 loops with pink threads.

All that remains is to finish the beret. To do this, tie pink thread around all the rows of stitches tied behind the front wall, which you started knitting from the 3rd row. Tie sc on the 2nd row.

You have a beret for a girl with a head circumference of about 48 cm ( 2 – 3 years).

To knit such a headdress for a child with a smaller head circumference, it is enough to reduce the number of rows and add loops.

Adding and decreasing beret loops for a one-year-old child:
9th r. – 126 p.
10th r. – add 54 loops as in row 13 in diagram 2. We get 180 stitches.
11th – 14th rr. – 180 p.
15th r. – 144 p.
16th r. – 116 p.
17th r. – 93 p.
18th r. – 75 p.
In the 19th row, decrease 5 stitches evenly. You will have 70 stitches left.
20th – 28th rows – 70 p.
As a result, you will get a beret for a one-year-old child with a head circumference of 45 cm.

Adding and decreasing stitches for a model for 4 years:
In rows 18 to 22 you need to decrease 29 stitches each
18th r. – 196 p.
19th r. – 167 p.
20th r. – 138 p.
21st r. – 109 p.
22nd r. – 77 p. (reduce 32 loops).
23rd – 33rd rr. – 75 p.
As a result, you will get a beret for a four-year-old child with a head circumference of 49.4 cm.

Crochet is almost like lace. This tool is used by needlewomen when they need to knit a beautiful thing for the home: a napkin for a table, a tablecloth, a bedspread. Even curtains are crocheted when there is enough time, patience and desire.

It’s easy to make a beautiful beret with your own hands. The main thing is to be good at crocheting. If you have started to master the tool, do not deny yourself the pleasure of tying the first thing - a beret.

The first beret is difficult to knit openwork, but dense, warm and elegant - certainly. Leave some more thread for a scarf, mitts, and mittens to complete your look. When you get a warm beret, you should take on the openwork version.

Crochet hats are usually crocheted from the top of the head. You need to pick up two or three loops, close them in a circle and knit in a spiral. In each loop, five single crochets are knitted. The new row is knitted like this: in each loop, after 1 - 2 single crochets. It all depends on the threads: sometimes you start to get something like a shuttlecock. Then the number of columns needs to be reduced. Does the knit tighten? Enlarge! Need to get smooth circle. Make sure to keep it even as you knit and add 6 to 8 stitches on each row. Continue knitting several rows without increments. Then start rows with decreases of 6–8 stitches. You need to try on the beret to understand when to stop decreasing. Having reached the desired parameter, knit the band in simple rows without decreasing.

The simplest beret is a summer version of the mesh type. You can knit it like a cobweb consisting of chains. Knitting begins from the middle: a chain of air loops is knitted. We make three to five loops and close the circle. Next, from each loop, knit several stitches, between which make an air loop. In the next row, knit a chain - seven loops, attaching to the resulting circle through three loops. A row is knitted with such chains, after which you need to knit chains of greater length, say, from eleven chain stitches, attached with a single crochet to the middle of the chains of the previous row. This is how the circle should be connected. After this, we do not increase the chains, but knit them to the same length.

If you are good at crocheting, then it will not be difficult for you to find beautiful openwork patterns for knitting a beret. For example, a fan pattern. Beginners can take more simple diagram. Cast on 5 chain stitches, from them we knit 2 chain stitches for lifting, and then alternate 3 chain loops and a double crochet from the base of the row - five times. The series closes. The next row again begins with two lifting loops and consists of repetitions of three chain loops and two double crochets. You need to do 11 repetitions, after which – 2 air loops. The third row is done in the same way, only 1 single crochet is performed. Next, the beret is knitted in the same way, only you need to add a column in each of the forming petals. Try on the job. When you realize that there is no need to increase the size, knit the petals straight and try them on again. Then you need to knit 7 rows in each petal with decreasing stitches. The bottom edge of the beret is knitted from two rows of single crochets.

Crochet beret for autumn for women - diagrams and description

Autumn berets should not be airy, like lace, because their task is to warm. Such a product needs to be made from thick threads, but it is not necessary to use wool and, especially, down yarn, because these are options for winter. For September and early October, you should choose acrylic yarn.

Crocheted berets - options in pictures

What do berets look like? crocheted, look at the pictures. Openwork knitting used for summer clothes, and thicker for winter ones.

Knitting patterns

Crochet products are sometimes easier to understand if you see a diagram in front of you rather than a row-by-row description. After all, most of the work is knitted in a spiral, so it is not always possible to understand where the row ends and the next one begins.

How to knit a warm beret for the winter

It is better to knit warm berets for winter from down threads. This will give them a stunning look and make them as warm as a fur hat. In addition, when knitting a beret, not a single animal will be harmed, since the yarn is made from sheared wool from goats or sheep of specially bred breeds. This type of wool is found under the name “Angorka” (more often called goat wool) or “Mohair” (this name refers to sheep or even camel's wool, which does not exclude its advantages). You can knit a beret from wool both by knitting and crocheting. A seamless product comes out either by crocheting or using circular knitting needles.

Winter beret “Snowball”: diagram and description

1.) Make 1 loop.

2.) We knit 12 single crochets from it.

4.) Again 24 stitches - one from the loop. We get a “snail”.

5.) We begin to knit this row differently: 1 tbsp. single crochet from the loop, from the next one - 2 similar stitches, 1 chain stitch and so on until the end of the row.

6.) 1 single crochet - from 2 loops, 2 tbsp. single crochet - from 1 loop, chain stitch - and continue until the end of the row.

7.) Next, make single crochets from each loop 3 times, 2 tbsp. – knit from 1 loop, knit a chain loop and continue until the end of the row. At first, the work will turn into a flounce, but do not worry, because the tails are included in the style of this beret. In addition, after this row you have to make decreases through the row. As a result, the resulting wedges will begin to wrap.

8.) So, we knit 2 single crochet stitches together, knit 1 stitch twice from a loop, and from the next stitch – 2 stitches, a chain loop and continue until the end of this row.

9.) 1 tbsp. Single crochet is performed 4 times, then 2 of the same stitches and an air loop. We do this until the row is completed.

10.) We knit 2 single crochets together, perform 1 such stitch three times, then 2 single crochets and a chain stitch until the row is completed.

Reductions are made until the work reaches the desired diameter.

The last two rows must be knitted with columns in each loop. The third row is special: you need to put an elastic band and tie it.

Today, berets and hats with braids are gaining popularity. Sometimes even an ordinary felt beret is found with braid-type clips. Such patterns are very good to make on knitting needles using a special pin. If it is not in your toolkit, then you should use a regular hairpin, an additional knitting needle or any other wire product that has a smooth surface from which the loops will not come off. Such a device allows you to overlap loops, which allows you to get the structure of a rope or braid.

If you only have a crochet hook in your arsenal, you should be smarter and make your work profitable using yarn. Learn to crochet with bouclé yarn. Even if you perform the beret using ordinary single crochets, the knitting will not look smooth precisely due to the special texture of the thread. In addition, the beret hat will be warm. You should initially make a pattern for the beret so that you can check your work against it. But if you knit without a pattern, then you need to make an even circle of at least 30 cm in diameter, and then think about decreasing. A simple fitting will show when to stop making them. Don’t forget to tie a band: it will allow the beret to fit well to your head and not stretch from wear. When the product has stretched, it is worth saving the work by knitting a row on the band, where to pass the elastic.

If you want to practice knitting berets with different patterns, then you won’t find a better model than a child. The largest number of options can be selected for girls, since boys are unlikely to wear elaborate openwork headdresses. While a girl—sister, daughter, niece or granddaughter—grows, both the size of the product and the style change. What a baby can wear is not always appropriate for a “young lady” of primary school age, and even more so for a teenage girl. While you practice - your model Small child. In addition, a small item can be knitted very quickly.

For little fashionistas, openwork crocheted berets are more suitable, as they are not very rigid. If done tight knitting, it is better to do it on knitting needles.

For an older child, it is good to knit a “Snowball” beret, because it looks great on both adults and children. Beginning knitters should make the petal beret described in the “Summer beret” section. You can also find many patterns on the Internet and create an original work of art based on them, if you are fluent in crocheting.

How to choose the right beret pattern and knitting method

You need to knit a beret not only as an abstract product, but as a wearable item. You must initially take the choice of pattern seriously. Do you prefer a solid color? Choose a relief pattern that can decorate your beret! If you are a minimalist by nature, then make do with plain knitting. Fans of African motifs should take a closer look at Kenyan berets. They usually follow the colors of the African country's flag. You can search for a pattern of the product on the Internet using the query “Bob Marley Beret.”

Openwork berets of the summer version are suitable for sophisticated natures. Do you want something airy in winter? It is worth choosing the “Snowball” beret pattern described above. It fits well on the head. Knit a beret from pastel-colored threads, which will definitely benefit you. It is worth knitting a tight pattern if the beret is knitted for the winter. The work is done both with crochet and knitting.

In addition to the pattern, it is important to know what color beret to choose. The color of the threads should be in harmony with your clothes, complexion and eyes. And you don’t have to think that green eyes Only orange or green color. Everything is decided near the mirror.