Acceptable leather colors for men's leather briefcases. Men's business briefcase as a manifestation of character and style
Updated: 10/18/2018 11:15:15
Expert: Sergey Vorontsov
*Review of the best sites according to the editors. About the selection criteria. This material is subjective in nature, does not constitute advertising and does not serve as a purchase guide. Before purchasing, consultation with a specialist is required.
A man's bag is always functional, because representatives of the stronger sex choose mainly practical things and accessories. However, designers all over the world are working on patterns, using different materials and colors - all to ensure that haberdashery for men is not only comfortable, but also in line with fashion trends. EXPERTOLOGY magazine presents a rating of the 13 best men's bags.
How to choose a men's bag
The first thing that is important to pay attention to is the material used to make the bag. Quality product, which will last for many years, should be made of leather, but sellers often pass off its artificial substitute as a natural material.
4 tips on how to identify genuine leather independently when getting acquainted with haberdashery in a store:
- Look for the skin sample label. Large manufacturers include it on the label. Genuine leather is soft, does not flake, does not melt, the pattern is shaped (leatherette has a diamond shape).
- The smell of natural material is specific and leathery, while leatherette has an artificial smell, reminiscent of paint.
- Surface properties: when touching a leather product, a feeling of heat transfer occurs. A more accurate indicator is wet hands; natural material does not retain droplets of water on its surface, but absorbs it.
- On the leather bag itself there are areas with exposed edges, where you can also see the structure of the material. As a rule, leatherette products do not have such cuts; all edge areas are carefully folded and stitched.
To identify real suede just run your hand against the “wool”: the natural material will change shade, the artificial one will remain the same. This unique property of suede fabric cannot be faked at present.
The second point of choice is the quality of the lining. Open the bag and evaluate the integrity of the seams, the uniform distribution of fabrics, and the serviceability of the internal locks. The fabric in the stitching areas must be dense, protruding threads are unacceptable.
Accessories should be comfortable: the buttons close without effort, as do the zippers and latches. Please note: applying force to close the locks is undesirable, it is inconvenient and leads to wear of the fittings.
Pens should be comfortable, fit well in the hand without slipping. Shoulder bag straps should be chosen not narrow, but wide - this way the loaded product will not put pressure and cut your shoulder. The length of almost all straps is adjustable; in addition, they can be equipped with locks and anti-slip pads.
When choosing a bag made of good leatherette, pay attention to the quality of the seams, lining and fittings. The situation is similar with the selection of textile products.
Rating of the best brands of men's bags
| Nomination | place | Name of product | rating |
| The best inexpensive men's bags | 1 | 4.8 | |
| 2 | 4.7 | ||
| 3 | 4.7 | ||
| 4 | 4.6 | ||
| 5 | 4.5 | ||
| 6 | 4.5 | ||
| The best men's bags in terms of price-quality ratio | 1 | 4.9 | |
| 2 | 4.8 | ||
| 3 | 4.8 | ||
| 4 | 4.7 | ||
| The best premium men's bags | 1 | 4.9 | |
| 2 | 4.9 | ||
| 3 | 4.8 |
The best inexpensive men's bags
Budget brands make bags from leather and its substitutes, but not of the highest quality, but in some cases this statement is unjustified and the products actually last a long time, maintaining appearance.
The Italian brand Malgrado opens our rating. This is a recognizable brand of inexpensive leather goods produced in Chinese factories under the copyright control of the country that owns the brand.
The Malgrado line has perhaps the widest selection of men's bags of various styles: briefcases, large and small models, bowlers and duffles, business cards, man purses. For their sewing we use genuine leather of high quality finishing brown, black and gray. The products are practical - they have many pockets with high-quality branded fittings, while the weight of the bags is always light.
You can buy Malgrado bags from 3,000 rubles.
Advantages
- Wide selection of bags of different styles;
- Convenient bags with multiple pockets;
- Branded reliable fittings;
- Material of manufacture – genuine leather;
- Wear-resistant lining.
Flaws
- The price is at the limit of the budget category.
In second place in the ranking is a brand from Belarus, the well-known Suffle. The product line consists primarily of genuine leather different colors and shades. True, the variety of models is not as wide as that of the leader, but there are no indents in quality - careful tailoring, reliable fittings and thick lining. For men, the line includes classic briefcases with short handles, man purses, briefcases and men's clutches. The manufacturer annually replenishes the collection, but not as widely and often as many would like.
You can buy a bag for a man from Suffle for an average of 2,500 rubles.
Advantages
- High quality cow leather for making;
- Functional pockets in each product;
- Basic models in the line of bags;
- Optimal quality fittings;
- Thick lining.
Flaws
- The collection is relatively modest in range;
- Small selection of colors.
In third place is the domestic leather goods brand Pellecon, whose men's bags are preferred by lovers of classic leather goods. For production, materials are used from the world's leading manufacturers of accessories and textiles, including eco-leather, and natural leather is predominantly of Russian finish. Local tailoring is the key to the relatively low cost of the entire Pellecon line of leather goods, including bags of various styles: travel bags, backpacks, briefcases, clutches, man purses and many others - almost all possible models.
A fly in the ointment is added by the not always high-quality stitching of pockets and fastening of accessories: users note weakening of the seams even with moderate loading of the bag. Fortunately, such cases are isolated and not systemic.
For a men's bag from Pellecon you will have to pay at least 2,000 rubles.
Advantages
- Domestic leather products;
- Wide range of styles;
- Good cut and tailoring;
- Imported fittings;
- Affordable price, one of the lowest in the rating.
Flaws
- Not always high-quality stitching;
- The most affordable models are made of eco-leather.
Forte
The Forte brand belongs to Russian craftsmen from St. Petersburg. The company is aimed at mask market buyers, but the collection also includes premium leather goods. For men, Forte offers purses and clutches, the line is not rich in other models, mainly wallets and belts - you can choose inexpensive accessories for the bag, complete good gift a young man or man of different social status.
Forte bags are made primarily from Russian leather, but the manufacturer does not always use high-quality material, so after several months of active wear, even natural material abrasions form. For this, the brand receives only fourth place in the rating.
You can buy a Forte bag from 1265 rubles.
Advantages
- Affordable prices;
- Good tailoring;
- Sturdy fittings.
Flaws
- Small selection of styles;
- Short-lived products - wear is observed after a few months.
Another foreigner in our ranking is the Italian Bolinni, a brand specializing in the production of budget leather goods. Assortment of men's bags made of natural and artificial leather pleasantly surprising - the collection contains products of many styles in different colors, for students and bosses, for young man and representatives of the older generation.
Judging by the reviews, the owners have no complaints about the quality of the bags themselves and the accessories - everything is done with the pedantry of the Italians. However, with not the widest choice of models, the price of the products is not affordable for everyone, despite the budget orientation of the segment.
You can buy a Bolinni men's bag from 3,000 rubles.
Advantages
- High quality leather goods;
- High wear resistance of leather and lining;
- Optimal choice of styles for different occasions and looks;
- Highly presentable for the budget segment.
Flaws
- Not the lowest price for inexpensive bags;
- Incomplete range of styles in the line.
Rounding out the category of budget men's bags Russian brand Alliance, which focuses its products on the classic shapes of cases and briefcases, backpacks and tote bags that are in demand among business men. For production, genuine leather or its substitutes on a fabric basis are used, which can withstand intense wear, including at low temperatures and high humidity.
A special feature of the bags is a plastic frame inside, which maintains the shape of the product when worn. It also prevents the wear of individual “problem” parts of the casing.
The price of an Alliance bag is from 2,000 rubles.
Advantages
- Classic lines of bags;
- Reinforced internal frame;
- Reliable fittings made of metal and plastic;
- High-quality eco-leather and genuine leather, resistant to wear.
Flaws
- A small range of styles.
The best men's bags in terms of price-quality ratio
Average price segment brands that are more widely recognized compared to their budget “brothers” are represented. Manufacturers offer customers bags with an optimal price-quality ratio, which are chosen by people of different social statuses and positions, including managers and entrepreneurs.
Duffy
The collection of the Swedish brand Duffy includes briefcases, backpacks, travel and belt bags, and purses made of genuine leather. All products are distinguished by functionality - many convenient pockets with high-quality fittings and a thick lining with the brand logo distinguish Duffy bags, as well as combinations of fabrics and colors: linen, cotton, eco-leather, textured and smooth genuine leather.
Duffy collections have a solution for everyone men's wardrobe from office style to city walk.
The price of brand bags starts at 4,000 rubles.
Advantages
- Wide selection of styles;
- Sturdy fittings;
- Quality materials tailoring;
- Unusual combinations of materials and textures.
Flaws
- Not defined.
GUESS
The GUESS brand, along with clothing and accessories, produces bags for men made of genuine leather, its substitutes and textiles. The line includes laptop bags, briefcases, clutches and purses, backpacks, travel models and many others. From collection to collection, the manufacturer experiments with the texture of materials and their combinations and focuses on quality, so each line of the bag is stitched perfectly evenly, and metal locks and zippers last throughout the entire life of the product.
Except leather bags The line includes backpacks and products made of synthetic materials impregnated from moisture penetration. The internal lining of all models without exception is dense, it does not fray at the seams.
The average price of GUESS bags is 10,000 rubles, the cheapest products start from 4,990 rubles, which is noticeably more expensive than the cost of products from the leading brand in the category.
Advantages
- Bags for any occasion and status;
- Experiments with the texture of materials;
- Exceptional quality of tailoring and accessories;
- High wear resistance of leather and synthetic textiles.
Flaws
- The price is higher than the leader in the rating, but the quality is similar.
The American brand Samsonite presents bags made of synthetic fabrics based on dense nylon, polyurethane and polyester. The choice of fabrics is not random - products made from them are more practical and durable than leather, and various impregnations provide protection against water penetration into the bag.
As for styles, Samsonite designers are laconic: they offer mainly basic models of city backpacks, travel, shoulder and belt bags, portfolios. The range is also not wide - traditional black and brown products, so mainly lovers of the classics and the presented range will be able to find something suitable for themselves.
Despite the absence of leather in the Samsonite collection, the cost of bags and backpacks is comparable in cost - from 6,000 rubles.
Advantages
- Practical nylon on the outside and thick textile on the inside;
- Careful stitching to prevent threads from coming out from under the stitching;
- A good basic collection of bags and backpacks for every day.
Flaws
- Minimum selection of models and colors;
- Quite a price for nylon.
Polo
The Polo brand needs no introduction – it is known all over the world. One of the activities is the production of bags for men. The line is designed taking into account the interests of modern men living in the rhythm of the city: a variety of tablet bags, crossbody bags, business large and small models differ in the texture and tone of the leather, and valve design elements. The assortment does not shine with variety, this is one of the Polo concepts - the production of clothes and accessories in an urban style, which is fully consistent with the bags from the collection. They will appeal to students, managers and employees for Everyday life and weekend walks.
Along with bags in the line leather goods Folders for documents, purses, and purses are presented. You can also choose the texture of the material: smooth skin or imitation of python, crocodile, different models and colors from black, blue and gray to red.
The cost of Prada bags is considerable, the minimum price is 10,000 rubles. However, the investment in a wardrobe is significant - the bags fit almost any style of clothing, but even with frequent wear, the leather does not wear out, maintaining its original appearance. Looking ahead, we note: Prada is the most recognizable brand among those represented in the category, and not the most expensive.
Advantages
- Exquisite perfect appearance;
- Variety of textures and colors of leather;
- Wide range of styles;
- Recognizable brand.
Flaws
- Not defined.
Montblanc bags are widely known among people with high status - the brand offers elegant products made of high-quality leather and textiles with branded embossing in the form of the top of Mont Blanc. Purses, briefcases and travel bags not only emphasize the high level of their owner, but also enhance it, because Montblanc is one of the most expensive leather goods in the world. The brand regularly improves its assortment taking into account fashion trends and customer wishes, so the collections become more presentable and elegant from release to release.
Montblanc leather goods are mainly used by businessmen, because the cost of one textile bag starts at 21,000 rubles, and one leather bag starts at 52,000 rubles.
Advantages
- Presentable leather and textile products;
- Highest quality and wear resistance;
- Regular update of the collection.
Flaws
- Very high price.
Connoisseurs of high fashion know firsthand about Salvatore Ferragamo, an Italian brand with Hollywood roots of the early 20th century, whose line, along with shoes and leather accessories, includes excellent bags for men who want to emphasize their high status.
The manufacturer uses specially tanned natural calf leather to sew bags, dyeing it and giving it different textures. The products do not wear out or deform; they can last for many years. The wide range includes different styles of bags, purses and clutches, even men's cosmetic bags.
What is typical for Salvatore Ferragamo is the absence of brand embossing or metal name patches in prominent places on the most expensive bags - they are hidden inside the product, on the sides or on the handles. Thus, the manufacturer focuses on quality rather than on manufacturer recognition. On relatively budget models, the inscription “Salvatore Ferragamo” is embossed or colored embroidery.
The cheapest SF bag costs 25,600 rubles, the most expensive – more than 100,000 rubles.
Advantages
- Wide range of classic bags;
- Long lasting color;
- Genuine calf leather, resistant to wear;
- Focus on quality without focusing on the brand.
Flaws
- Lack of sports models;
- High price.
Attention! This rating is subjective in nature, is not an advertisement and does not serve as a purchase guide. Before purchasing, consultation with a specialist is required.
A man's briefcase is an accessory for a person who does a lot of paperwork. It is designed to protect essential papers, securely transport them, and store personal belongings. Modern briefcases have several compartments, rigid walls and dense material. The first memories of the prototype of this type of bag date back to the times of the Roman legionnaires. Further, this accessory did not undergo fundamental external changes, only the quality and production features were improved. Throughout human history, briefcases have been used by students and teachers, businessmen and lawyers, travelers and priests. The portfolio has become popular in many countries around the world. Traditionally, it was made of leather, it had a metal frame and a comfortable handle. While improving and preserving the original concept, the portfolio has reached our times. Today it has not lost its popularity and is a daily companion for those who value comfort and style. Leading manufacturers are working on this wardrobe item, making it more convenient and practical.
How to choose a good men's briefcase?
The modern market is rich in originals and fakes; many companies save on production and captivate with their low prices for goods. But this type of bag is designed for constant use and must be of high quality. How to choose one that will accompany you every day and make your life more convenient?
First of all, take a responsible approach to choosing the material. It should be thick genuine leather or eco-leather of very high quality. Then the surface will be resistant to damage, scratches, and will not wear off or crack. Such a briefcase will retain its shape longer and withstand the load.
The next thing you should pay attention to is the fittings. Many briefcases are equipped with one or two metal clasps at the front. They must be made of damage-resistant material with a well-coordinated mechanism that does not deteriorate or jam. Also check the handle fastening and the locks of the internal pockets. The comfort of the owner depends on the quality of these parts.
When choosing a briefcase, take a good look at the seams and exterior trim. It depends on them whether the briefcase will look neat and whether it will retain its original appearance after long use. The walls of the briefcase must be rigid. The handle is an important part of the bag, which must have additional fastenings. There are briefcases with two handles, as well as those that have an additional strap and can be worn on the shoulder.
The color scheme of men's briefcases is restrained. Typically these colors are:
- black;
- grey;
- auburn;
- brown;
- Navy blue.
The surface can be matte or glossy, there are models with a relief coating. The classic choice is a black, laconic briefcase. It does not lose its relevance and is combined with other shades. You can choose a different color that will look interesting and highlight the individuality of the owner. The briefcase is combined with a business suit, classic style.
Advantages of a briefcase over other types of bags
The first thing that distinguishes a briefcase from other accessories is its functionality. Everything in this bag has been thought out: hard walls preserve the integrity of papers, additional compartments allow you to distribute things in a convenient order, pockets inside and outside are designed so as not to waste time looking for your phone, keys, wallet. His appearance is always relevant and complements the image.
Pay attention to details when choosing a briefcase and enjoy the quality of the accessory. A good briefcase means daily comfort, mood and style.
GOST 28631-2005
Group M52
INTERSTATE STANDARD
BAGS, SUITCASES, BRIEFS, STUFFS, FOLDERS, SMALL LEATHER GOODS
General technical conditions
Bags, cases, brief-cases, satchels, paper-cases, small leather goods.
General specifications
MKS 59.140.35
OKP 87 0000
Date of introduction 2007-01-01
Preface
The goals, basic principles and basic procedure for carrying out work on interstate standardization are established by GOST 1.0-92 "Interstate standardization system. Basic provisions" and GOST 1.2-97 "Interstate standardization system. Interstate standards, rules and recommendations for interstate standardization. Procedure for development, adoption, application, renewal and cancellation"
Standard information
1 DEVELOPED by the Federal State Unitary Enterprise "Central Research Institute of the Leather and Footwear Industry" (FSUE TsNIIKP)
2 INTRODUCED by the Federal Agency for Technical Regulation and Metrology
3 ADOPTED by the Interstate Council for Standardization, Metrology and Certification (Protocol No. 22 of November 4, 2005)
The following voted for adoption:
Short name of the country according to MK (ISO 3166) 004-97 | Country code according to MK (ISO 3166) 004-97 | Abbreviated name of the national standardization body |
Azerbaijan | Azgosstandart |
|
Armenia | Armgosstandard |
|
Belarus | State Standard of the Republic of Belarus |
|
Georgia | Gruzstandart |
|
Kazakhstan | Gosstandart of the Republic of Kazakhstan |
|
Kyrgyzstan | Kyrgyzstandard |
|
Moldova | Moldova-Standard |
|
Russian Federation | Federal Agency for Technical Regulation and Metrology |
|
Tajikistan | Tajikstandard |
|
Turkmenistan | Main State Service "Turkmenstandartlary" |
|
Uzbekistan | Uzgosstandart |
|
Ukraine | State Standard of Ukraine |
4 By Order of the Federal Agency for Technical Regulation and Metrology dated May 10, 2006 N 91-st, the interstate standard GOST 28631-2005 was put into effect as a national standard Russian Federation from January 1, 2007
5 INSTEAD GOST 28631-90
Information on the entry into force (termination) of this standard is published in the “National Standards” index.
Information about changes to this standard is published in the index (catalogue) "National Standards", and the text of the changes is published in the information indexes "National Standards". In case of revision or cancellation of this standard, the relevant information will be published in the information index "National Standards"
1 area of use
1 area of use
This standard applies to bags, suitcases, briefcases, school bags, folders, small leather goods (hereinafter referred to as products).
2 Normative references
This standard uses references to the following standards:
GOST 15.007-88 System for development and production of products. Light industry products. Basic provisions
GOST 427-75 Metal measuring rulers. Specifications
GOST 13841-95 Corrugated cardboard boxes for chemical products. Specifications
GOST 17435-72 Drawing rulers. Specifications
GOST 18242-72 Statistical acceptance control based on an alternative criterion. Control plans*
________________
* On the territory of the Russian Federation, GOST R 50779.71-99 "Statistical methods. Sampling procedures for alternative characteristics. Part 1. Sampling plans for successive batches based on an acceptable quality level AQL" is in force.
GOST 18321-73 Statistical quality control. Methods for random selection of samples of piece goods
GOST 25871-83 Leather goods. Packaging, labeling, transportation and storage
GOST 28455-90 Leather goods. Terms and Definitions
GOST 29329-92 Scales for static weighing. General technical requirements
Note - When using this standard, it is advisable to check the validity of the reference standards using the “National Standards” index compiled as of January 1 of the current year, and according to the corresponding information indexes published in the current year. If the reference standard is replaced (changed), then when using this standard you should be guided by the replaced (changed) standard. If the reference standard is canceled without replacement, then the provision in which a reference is made to it is applied in the part that does not affect this reference.
3 Terms and definitions
This standard uses terms according to GOST 28455.
4 Classification, main parameters and dimensions
4.1 Products by type must comply with GOST 28455.
4.2 The dimensions of bags, suitcases, briefcases, satchels, folders, small leather goods must be indicated in the technical description.
Permissible deviations in the size of small leather goods products are ±5 mm, other products are ±10 mm.
4.3 The dimensions of covers for documents and certificates must be indicated in the technical description.
Permissible deviations in the dimensions of the product when opened: length - ±5 mm, height - ±3 mm.
5 General technical requirements
5.1 Products must be manufactured in accordance with the requirements of this standard, technical descriptions and technologies approved in the prescribed manner, a standard sample in accordance with GOST 15.007.
5.1.1 Technical descriptions must contain:
- product name, model number;
- description of the design, manufacturing method, internal and external design of the product;
- materials and accessories used, indicating the regulatory document;
- dimensions of the product (if necessary, rules for their measurement);
- mass of backpacks;
- photo or sketch of the product;
- packaging requirements.
5.2 Material requirements
For the manufacture of products, natural, artificial and synthetic leather, fabrics, plastics, polyvinyl chloride film, cardboard, fiber, knitting and weaving materials, other materials and accessories are used.
Artificial and synthetic materials, textile materials made from chemical fibers, used for the manufacture of children's bags and suitcases, school bags and backpacks, must be approved for use by government health authorities.
When making children's bags and suitcases, school bags and satchels, parts made from materials of contrasting colors, finishing details and accessories with reflective elements on the front, side surfaces and top flap of the product.
5.3 Characteristics
5.3.1 Products are manufactured using the following methods: stitching (threads or holding), adhesive, welding (high frequency currents), riveting, braiding, knitting, braiding, molding, casting, combined and others.
5.3.2 The strength of the fastening of load-bearing seams of the product body, fastening of handles and shoulder straps under static load must correspond to Table 1.
Table 1 - Strength of fastening of load-bearing seams of the product body, handles and shoulder straps
product name | Strength of thread seam, N/cm (kgf/cm), not less | Strength of high-frequency welded seam, not less | Breaking load of attachment points for handles and shoulder straps (or maximum load), N (kgf), not less |
|
during delamination | in shear, MPa (kgf/cm) | |||
Women's and casual and men's bags (including youth) | ||||
Shopping bags, beach bags: | ||||
made of artificial leather, laminated fabrics, impregnated or coated | ||||
from fabrics without impregnation and coating, polymeric materials | ||||
Bags for students, women's and student's briefcases, satchels, business folders | ||||
Travel bags, sports bags, travel briefcases, men's briefcases, diplomatic suitcases, travel suitcases of soft and semi-rigid construction | ||||
Rigid travel suitcases, wardrobe suitcases | ||||
5.3.3 Painting when decorating products and painting of cut edges must be resistant to dry and wet friction.
5.3.4 Open cut edges of external parts of products should not crumble.
5.3.5 Sections of open seams inside products must be covered with edging, keder or processed by high-frequency welding or overcasting. It is allowed not to close or process open seam sections inside products made of natural leather, artificial leather with a non-shedding base, impregnated or film-coated fabric.
5.3.6 Holes in bags that are closed by holding the cord must be treated with high-frequency welding or reinforced with eyelets.
It is allowed to produce bags from genuine leather and bags for children preschool age without grommets and processing of holes by high-frequency welding.
5.3.7 A gap in the frame lock of bags is allowed no more than 0.2 cm.
5.3.8 Travel bags with a rigid bottom pad must be made with bulges on the bottom. It is allowed to produce travel bags on wheels and bags with an inserted hard bottom without bulges.
5.3.9 Women's everyday, youth and dressy bags are made with one or two internal pockets.
It is allowed to make bags without internal pockets:
- youth and elegant ones with a length of no more than 20 cm;
- youth without lining;
- bags with one or more external pockets.
Travel, sports and student bags are made with one or more internal or external pockets.
5.3.10 The gap between the lid and the body of the suitcase is allowed to be no more than 0.4 cm.
5.3.11 Suitcases made of genuine leather must be made with a lining.
Hard botanicals (other than plastic ones) inside unlined suitcases must be covered with top or lining material.
5.3.12 Suitcases must have one or more pockets inside.
It is allowed to make suitcases without pockets:
- covered with paper on the inside;
- with partitions (compartments) that serve the purpose of pockets.
5.3.13 There should be one or two lid holders inside the suitcase.
In an open suitcase, the angle between the lid and the body should be within 90°-120°, in suitcases with metal lid holders - 80°-120°.
It is allowed to manufacture suitcases without lid holders if:
- the suitcase closes with a zipper;
- the hinges have special clamps that ensure the stability of the suitcase when open;
- the lid and body have the same volume;
- an internal soft hinge made of upper or lining material is used.
5.3.14 Suitcases with a length of 60 cm or more must have at least two internal tightening straps.
Suitcases lined with paper inside can be manufactured without internal tightening straps.
5.3.15 There should be one or two hangers inside the suitcase-wardrobe.
5.3.16 Suitcases must be made with bulges at the bottom.
It is allowed to make suitcases without buttons:
- length no more than 40 cm;
- using external profiled keder along the bottom of the body and lid;
- with other parts that fulfill the purpose of the buttons.
5.3.17 Wedges or bottoms in the upper part of briefcases and backpacks of soft and semi-rigid construction must be additionally attached to the front and back walls.
5.3.18 Student briefcases and backpacks must be made with pockets or partitions or liners instead of pockets and partitions.
5.3.19 The metal plate in briefcases (except for student ones) must be hidden.
5.3.20 Satchels must be made with a handle.
The length of the shoulder straps should be adjustable. Shoulder belts with a width of less than 3 cm must be made with a safety pad.
It is not allowed to use buckles with a peg to close student briefcases and backpacks.
5.3.21 The mass of backpacks should be no more than 1000 g.
5.3.22 Covers for the certificate of a disabled person must be red, covers for the certificate of a war participant - any color except red.
5.3.23 It is not allowed to use films for lining in document covers.
5.3.24 The gap in the frame lock of the products should not be more than 0.1 cm.
5.4 Determination of variety
5.4.1 Two grades are established for products: 1st and 2nd.
It is allowed to produce products without division into grades, and they must meet the requirements for 1st grade products.
5.4.2 The grade is determined by the permissible defects located on the outside of the product, according to Table 2.
Table 2 - Allowable defects on the outside of the product
Name of defect | Permissible defect value |
|||||||
Bags for women, men, children | Travel bags, shopping bags, sports bags, beach bags, suitcases | Briefcases, backpacks, student bags, folders | Small leather goods products |
|||||
1 Odor- | Except the walls | Admission- | Except the walls | Admission- | Except the walls | Admission- | 5% area of parts | 15% area of parts |
2 Impersonal items no larger than 0.5 cm in size, pcs., no more | 1 - folders; | 3 - folders; | ||||||
3 Mechanical scratches in total, cm, no more | Not allowed | Not allowed | Not allowed | Not allowed | ||||
4 Jams in total, cm, no more | ||||||||
5 Miscellaneous | Except the walls | Slabovy- | Except the walls | Slabovy- | Except the walls | Slabovy- | Except the walls | Slabovy- |
6 Twins and spans in two threads, places, no more | Not allowed | Not allowed | Not allowed | Not allowed | ||||
7 Subple- | ||||||||
8 Stripe due to different linear density or from decotir, undercut, nick, places, no more | ||||||||
9 Strip from thickening of the thread over three times to five times the thickness, incl., places, no more | ||||||||
10 Thickening of the thread, from more than five to eight times | Not allowed | Not allowed | ||||||
11 Distinguish- | Slabovy- | Noticeable | Slabovy- | Noticeable | Slabovy- | Noticeable | Slabovy- | Noticeable |
12 Spots measuring no more than 1 cm along the greatest length in total, pcs., no more | Not allowed | Not allowed | Not allowed | Not allowed | ||||
13 Dives in total, cm, no more | ||||||||
14 Distortion of material pattern over a length of 50 cm, cm, no more | ||||||||
15 Warp of parts and displacement of fittings, cm, no more | ||||||||
16 Rejection | ||||||||
17 Unequal- | 0,1 - folders; | 0,1 - folders; 0.2 - other products | ||||||
18 Punctures from a needle along the length, cm | Not allowed | Not allowed | ||||||
Notes |
||||||||
The outer side in blotter and address folders, wallets and purses is considered to be both sides of the products in an open form.
The total number of defects in one product should not be more than indicated in Table 3.
Table 3 - Total number of defects in one product
product name | Total number of defects in the product |
|
1st grade | 2nd grade |
|
Bags for women, men (including youth), children's bags, small leather goods | ||
Travel bags, shopping bags, sports bags, beach bags, for students, suitcases, briefcases, satchels, folders | ||
5.4.3 The following are not considered defects in products:
defects of natural leather - well-overgrown fistulas and pockmarks, overgrown scratches, corneas, scars, wrinkles, milk lines, slight screed, markings, mild veininess, lick, overgrown insect bites, shallow (to the thickness of the skin) undercuts, uneven coloring on aniline leathers, semi-aniline and other special dyeing methods.
5.4.4 The following are not allowed in products:
stains on the lining measuring more than 1 cm in greatest length;
shedding and stripping of the coating of the material;
peeling and peeling of paint and varnish and metal coatings, chips, cracks, sharp edges, burrs, areas of corrosion on fittings;
cracks in the front surface of the material;
dirt and glue clumps;
shells on the outside of artificial leather products more than 5 pcs.;
holes and burns in a weld or hatch line;
skipped stitches, looped, loose and tight stitches;
twisting of braid and holding;
the presence of sprues, shells, burrs in injection molded parts;
lowering loops in knitted items;
stitching falling off the edge of a part;
displacement of the decorative pattern is more than 0.3 cm;
rupture of material in the area where the fittings are attached;
loss of rivets, buttons, grommets;
faulty locking hardware.
5.4.5 The products in the set must be of the same type.
5.5 Labeling, packaging
5.5.1 Labeling and packaging of products in accordance with GOST 25871 with the following additions.
It is allowed to mark products on labels made from waste artificial leather, ribbons and braid made from artificial and synthetic fibers; marking on a paper label of bags made of elastic polymer materials, shopping bags of a simplified design, suitcases covered with paper inside, address and blotter folders, small leather goods.
It is allowed to use other materials for labels that ensure the quality of marking, as agreed with the consumer.
Suitcases made of ABS plastic and polystyrene are packed in boxes made of corrugated cardboard according to GOST 13841 and other regulatory documents adopted on the territory of the states parties to the Agreement.
Consumer packaging with products must be covered with parcel tape.
6 Acceptance rules
6.1 Acceptance of products is carried out in batches. A batch is considered to be a simultaneously presented quantity of products of the same article, grade, manufactured using the same technology and issued with one quality document.
6.2 When accepting products, continuous or selective control is used.
6.2.1 The manufacturer carries out continuous inspection of products in terms of appearance, compliance of labeling and packaging with the requirements of regulatory documents.
6.2.2 Checking of products by appearance, compliance with labeling and packaging by the consumer and during control checks is carried out selectively.
The selection of product units during sampling control is carried out using the random sampling method in accordance with GOST 18321. The main type of control is normal, the control plan is single-stage, control level II is general.
The acceptance level of defects is 1.5% according to GOST 18242.
A batch of products is accepted if the number of defective units in the sample is less than or equal to the acceptance number (defective units must be corrected or replaced).
A batch of products is rejected if the number of defective units in the sample is greater than or equal to the rejection number.
6.2.3 The manufacturer periodically checks the products:
to determine the size, weight, strength of seams, fastening of handles and shoulder straps - at least once every six months;
to determine color fastness - at least once a month.
6.2.4 During control and periodic checks to determine dimensions, color fastness, weight, strength of seams, fastening of handles and shoulder straps, a sample is taken from the total number of products in the batch:
to determine size and color fastness - 0.1%, but not less than three products;
to determine the weight, strength of seams, fastening of handles and shoulder straps - three samples.
If the control results are unsatisfactory, repeated control is carried out according to this indicator on a double number of products (samples) newly selected from the same batch.
The results of the re-inspection are applied to the entire batch.
7 Control methods
7.1 The appearance of products is determined visually by comparison with a reference sample.
7.2 Measure products with a ruler in accordance with GOST 427 and GOST 17435.
7.3 The weight of the backpacks is determined by weighing on scales in accordance with GOST 29329.
7.4 The color fastness test is carried out by rubbing three times with a white cotton cloth, dry and moistened without force. The fabric is moistened until its weight increases by 75% for natural leather and by 100% for other materials. Dyeing of fabric and shedding of dye is not allowed.
7.5 Testing the strength of seams and fastenings of handles and shoulder straps for tensile strength and design load is carried out on samples of fastening units made in accordance with the fastening units of the test sample; for maximum load - on samples of finished products.
7.5.1 Tests are carried out on an RT-250 tensile testing machine and similar machines of other types. The breaking load of the samples should be in the middle third of the machine load scale.
Distance between clamps of the tensile testing machine: (100±2) mm when testing the strength of seams, (200±2) mm when testing the fastening strength of handles and shoulder straps.
Speed of movement of the lower clamp - (100±10) mm/min.
The longitudinal axis of the sample must coincide with the direction of application of the load.
7.5.2 To test the tensile strength of seams and the design load, samples are cut out rectangular shape size (50x100)±1 mm. The samples on the smaller side are connected with a seam in accordance with the fastening points of the product being tested. The seam should be located in the middle of the sample, the ends of the threads at the beginning and end of the stitch should be tied in a knot.
Before testing the strength of seams, measure the length of the seam between the extreme points, as well as the width of the weld when connecting samples overlay. Samples of the fastening unit for testing the strength of the weld are conditioned (in laboratory rooms, special chambers or desiccators) at relative air humidity (65±2)% and temperature (20±2) °C for at least 24 hours after welding.
7.5.3 When testing the fastening strength of handles and shoulder straps for tensile strength and design load, the dimensions of the part corresponding to the body of the product must be (100x200)±2 mm.
The diagram for fastening samples of fastening units is in accordance with Figure 1.
Figure 1 - Fastening samples of fastening units
Symmetrical cutting of the corners of a sample fixed in the lower clamp of a tensile testing machine is allowed when using a clamp with a length of less than 100 mm.
Testing of products for maximum load is carried out if it is impossible to test the strength of the attachment points for handles and shoulder straps without the use of special devices for securing them in the clamps of the tensile testing machine.
7.5.4 When testing the strength of seams, fastening handles and shoulder straps for tensile strength or design load, samples are secured in the clamps of a tensile testing machine so that the fastening unit is located in the middle between the clamps and parallel to their edges. When testing the strength of a thread seam, the lining and cushioning materials are not secured in the clamps.
At the end of the test, the load is recorded and the nature of the rupture (material, threads, etc.) is noted.
7.5.5 The strength of thread and weld seams during delamination is calculated using the formulas:
where is the load at rupture of the samples, N (kgf);
- length of the seam between the extreme points, cm.
The shear strength of an overlay weld () is calculated using the formula
where is the area of the sample seam, cm.
The arithmetic mean of the sample test results is taken as the final test result. The test result is calculated with an accuracy of 1.0.
7.5.6 The fastening strength of handles and shoulder straps during tensile testing is characterized by the load at break of the sample.
7.5.7 When testing the strength of fastening of handles or shoulder straps for maximum load, a uniformly loaded product is suspended in a free state by the handles or shoulder straps on a rod parallel to the floor of the room.
The weight of the load must correspond to the maximum load of the product.
The product is considered to have passed the test if no destruction of the fastening unit is detected.
The time for testing the product for maximum load is five days.
8 Transportation and storage
Transportation and storage of products - in accordance with GOST 25871.
9 Manufacturer's warranty
9.1 The manufacturer guarantees that products comply with the requirements of this standard subject to the conditions of transportation and storage.
9.2 Warranty period from the date of retail sale, days:
50 - women's, men's, travel, sports bags;
30 - shopping bags, beach bags, for students, student briefcases, backpacks, small leather goods;
70 - suitcases, business and travel briefcases, folders.
The text of the document is verified according to:
official publication
M.: Standartinform, 2006
A briefcase for men is truly a necessary thing. Today, both middle-aged men and students take it. This accessory is especially necessary for those who have to work with documents (papers). Today, many people prefer to purchase less formal bags (they are softer, more comfortable, and cheaper). However, if you have to move very important documents every day (and quite large quantities), you should pay attention to the above accessory option. What to consider when choosing a portfolio?
- Style;
- Material;
- Color;
- Size.
Now you should note each point in more detail...
- Style. Today on the market you can find quite a lot various options styles. The main ones are:
- classical;
- modern.
Among the features of the first option, it should be noted that it includes a fairly solid body, lid, and lock. If we talk about a modern briefcase, they practically do not include the above elements (in 90% of cases they are simply closed with a zipper). Externally, modern portfolios do not look very strict (for example, for the owner of a company it is better not to buy one).
The classic one includes one subgroup: the briefcase-diplomat. A rather “strict” option, which is not so easy to find on the market today. They are still in demand, but their structure is more modern;
- Materials. Today you can find quite a lot of materials on the market. The cheapest ones are leatherette and nylon. These materials are distinguished by the fact that they have a cheap appearance, as well as very low wear resistance.
There are better quality leatherette options. For example: eco leather. The whole point is that the quality of the material is higher, the appearance looks more expensive.
Which material to choose?
In fact, everything here depends only on the financial capabilities of each person. If there is no money, there is no point in talking about leather, but... Everyone recommends taking the leather option (if possible). The skin endures itself much better and longer. Why pay multiple times? It is possible to purchase a portfolio once and carry it for several years. If we talk about savings, then this option is optimal;
- Color. In fact, you don’t need to be any kind of specialist in order to understand: the use of briefcases is not for children and specific youth. Basically, manufacturers focus on classic colors (in 90% of cases).
The following options:
- black;
- brown.
How to choose a color?
In fact, everything here depends only on the taste of the owner himself. Some people make a choice according to their clothes. If, for example, a young man has a brown jacket or coat, a brown briefcase will look much better (in combination with the clothes themselves).
And yet, the black color of a men's briefcase is in most demand on the market;
- Size. The dimensions of the portfolios are arranged by the manufacturer based on the goals of the buyers. Most of all, the emphasis is placed on the dimensions of those things that will fit into the briefcase. For example: the size is adjusted to fit a notebook or A4 sheet. Thus, everyone can choose a briefcase according to its intended purpose (students can take a very small briefcase, business men can take a briefcase with standard sizes for A4 sheet for documents).
Choosing a men's briefcase - Difficult choice. Why? A man or guy has to be with his briefcase literally everywhere. In order not to lose face, so that such an accessory turns out to be primarily convenient and of high quality, you should pay attention to all the above elements.
Men's leather briefcases traditionally in demand by people involved in the business, diplomatic or scientific environment. A leather briefcase, moreover, looks stylish and solid. There are models designed in a modern way, and there are those whose style is timeless and therefore appropriate in both formal and informal settings. A briefcase is convenient for carrying a laptop, documents, magazines - men often choose it as an everyday solution.
In this article we will briefly describe what briefcases are like in terms of design and in terms of differences between brands. We’ll also find out what you should pay attention to Special attention when purchasing a men's briefcase.
At first glance, the diversity of portfolios is limited by their general “format”. But in reality, artists and designers are finding ways to go beyond the established canon. First of all, briefcases differ in style: it can be a strict but modern business solution, a youth model or a classic antique leather briefcase. Each of these types has its own charm and its own priority qualities.
A youth leather briefcase should be stylish and light so as not to hamper the owner’s mobility when he or she moves on foot. Modern youth design allows for bold colors, original texture, prints on the lining and both sharp and rounded corners of the briefcase. For example, leather briefcases Giorgio Fedon 1919 or Porsche Designn for young men they are not only gray-black and brown, but even orange. In addition, a youth briefcase with a shoulder strap is possible - this solution looks like a briefcase bag with a handle. Another liberty characteristic of the ultra-modern style - The briefcase can be closed with a zipper, latch or button.
Business leather briefcases for men, Diplomat, for example, they almost always adhere to strict classical shape and have sharp or slightly rounded corners. Dominated by black and brown colors, although in rare cases the briefcase may be specially matched to the color of the suit. The key principle here is minimalism, lack of pretentiousness. In the same time, business style implies status decisions: the brand matters, but the main thing is that the item looks high quality: in materials, exterior and interior decoration, fittings.
Men's leather briefcase Montblanc or S.T.Dupont- an excellent example of an image business decision. Briefcases with an interior made of thin polished leather (for example, suede) instead of fabric are considered especially chic. A compact size is not necessary - it all depends on your needs, but in any case, a business briefcase should be able to accommodate A4-sized documents with a reserve. It is better to choose classic fasteners - in the form of a metal latch. It is not only aesthetically pleasing, but durable and reliable.
More budget options offers brand Vasheron. Here are stylish blue briefcases. Such models will appeal to connoisseurs of new classics.
Rounded corners and patch pockets - distinctive features men's casual briefcases. Everyday solutions may look more or less formal, but their main purpose is to ensure comfortable carrying of things while traveling around the city. Consequently, functional features come first. Such as the presence of additional compartments, pockets for small items, holders for writing instruments and a phone. Since the item is designed for everyday use, the lower corners are often protected metal plates. The colors of men's briefcases for every day are usually brown or black. However, just as in the case of youth models, there cannot be strict restrictions here. For such portfolios, we turn to the collections of the brands Brialdi and Piquadro.